/*
Sketch: GPRS Call Up 

Function: This sketch is used to test seeeduino GPRS's callUp function.to make it 
work, you should insert SIM card to Seeeduino GPRS and replace the phoneNumber,enjoy it!
*********************************************************************************
note: the following pins has been used and should not be used for other purposes.
  pin 8   // tx pin
  pin 7   // rx pin
  pin 9   // power key pin
  pin 12  // power status pin
*********************************************************************************
created on 2013/12/5, version: 0.1
by lawliet.zou(lawliet.zou@gmail.com)
*/

#include <gprs.h>
#include <SoftwareSerial.h>

GPRS gprs;

void setup() {
  Serial.begin(9600);
  while(!Serial);
  Serial.println("GPRS - Call up Test...");
  gprs.preInit();//power on SIM800
  delay(1000);
  while(0 !=gprs.init()) { //gprs init
      delay(1000);
      Serial.print("init error\r\n");
  }  
  Serial.println("Init success, start to call...");
  gprs.callUp("150****9566");
}

void loop() {
  //nothing to do
}